NEO Managed Services

Home/Structured Cabling

Structured cabling

The physical layer, designed and installed to standard.

Every network, phone, camera, door reader, and access point depends on the cable behind the wall. We design and implement structured cabling systems for new construction, renovations, expansions, and overdue clean-ups — certified, labeled, and documented.

Why it matters

Bad cabling looks like bad Wi-Fi, bad phones, and bad luck.

Intermittent drops, cameras that freeze, access points that never hit their rated speed, phones with static — a remarkable share of “network problems” are cabling problems: unrated cable, untested terminations, runs too long, bundles crushed above the ceiling, and racks nobody can trace.

We design and install to the TIA/EIA-568 family of standards and industry best practice, with every link tested and certified against the category it is sold as. The result is a plant that will carry today’s gigabit and multi-gigabit loads, power your devices over PoE, and still make sense to the next technician who opens the rack.

Design-led. Because the same team designs your network, Wi-Fi, phones, and security systems, drop counts and locations are engineered from the actual device plan — not guessed from a floor plan.

What we deliver

From the demarc to the desk.

01

Horizontal copper

Category 6 and 6A cabling for workstations, phones, printers, wireless access points, cameras, and door hardware — plenum or riser rated as code requires, routed and supported properly.

02

Fiber backbone

Single-mode and multimode fiber between buildings, floors, and telecom rooms; fusion-spliced and terminated, with pathway design for growth.

03

Telecom rooms

MDF and IDF layout, racks and cabinets, patch panels, cable management, power, cooling considerations, and bonding and grounding.

04

Low-voltage for security & AV

Dedicated drops and pathways for cameras, intercoms, readers, sensors, speakers, and displays — coordinated with the security and communications designs.

05

Demarc extensions & carrier hand-offs

Extending carrier circuits from the building entrance to your equipment room, and cleanly landing them for routers and firewalls.

06

Certification & documentation

Every link tested with a calibrated certifier, labeled at both ends to a consistent scheme, and delivered with test results, as-built drawings, and a patching schedule.

How we work

Design, coordinate, install, certify.

01

Survey & design

Walk the space, read the drawings, and build a drop schedule from your real device plan — workstations, APs, cameras, doors, and growth.

02

Coordination

Pathways, firestopping, ceiling and wall conditions, and timing coordinated with your contractor, landlord, and electrician.

03

Installation

Clean, supported runs; proper bend radius and separation; terminated to standard; racks dressed and labeled.

04

Certification & hand-off

Test results for every link, as-builts, and labels that match the documentation — then we patch in your network and turn it up.

Pair cabling with enterprise Wi-Fi and physical security for one coordinated low-voltage design.

Related services

Build on the same foundation.

Each solution is designed and run by the same team, under the same security controls — so nothing is bolted on.

Next step

Bring us the floor plan.

Whether it’s a new build or a rack that has become a mystery, we’ll scope the work, propose a design, and deliver a certified result.

Request a cabling design